changing touch speed

  • Filter
  • Time
  • Show
Clear All
new posts

  • changing touch speed

    I am wanting to change the touch speed from 5 down to 2. We have several hundred programs though. Do I have to open each one and edit one by one?

  • #2

    Look at this thread they are currently talking about. Same thing just different objective.
    (In Memory of my Loving wife, "Ronda" who I lost March 7, 2016. I love you baby.)
    They say "Nobody's Perfect." I must be Nobody.


    • #3

      Here is the solution. Post#24

      ** Hopefully touch speed is listed on the available commands.
      Last edited by Roberto; 05-17-2018, 11:22 AM.
      sigpicIt's corona time!
      737 Xcel Cad++ v2009MR1....SE HABLA ESPAƑOL


      • #4
        Thank you


        • #5
          Roberto : does it work for parameter sets (for autocal) ?


          Related Topics


          • Master Chief
            Touch speed
            Master Chief
            Have a question with touch speed. If I slow down my touch speed in the middle of a program (to measure a couple of fairly small holes) would this affect...
            02-04-2009, 11:44 AM
          • ADAM WALLACE
            touch speed clarification
            ADAM WALLACE
            I have a program running at 75 percent move speed. I need to slow the move speed down from the 75 because of false triggers moving in the z axis of the...
            10-24-2013, 10:23 AM
          • Jonde1
            Changing move speed?
            Is there a way of changing the default speed on our machine? We have just upgraded to Pc-dmis cad++ 2014 and realise that the machine moves a lot slower...
            03-06-2015, 01:22 AM
          • Jignesh
            Touch speed and scan speed
            I took one point in 5mm. slot. The touch speed is 2% and scan speed is 10% and both are default. I did not change speeds. Would it be better to change...
            03-10-2016, 01:53 PM
          • Steve R
            Machine speed
            Steve R
            Hi everyone , I am having a problem with the speed of my cmm my programs and calibration runs slow, even with the speed up to 100%, what can I do...
            12-06-2016, 07:21 PM