Z Axis Dimensions Issues

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • metz317
    replied
    I figured it out. My Z plus wasn't leveled correctly. I'm measuring a welded part made of tubes. So, I had to construct a plane out of points. As soon as I did that. everything came in pretty well.

    Leave a comment:


  • Obelix
    replied
    Did you execute/run this part/program?

    Leave a comment:


  • metz317
    replied
    THEO/<70.193,430.879,-119.649>,<-0.0007681,0.28337,0.9590103>
    ACTL/<66.437,412.166,149.892>,<-0.0007681,0.28337,0.9590103>
    MEAS/POINT,1,WORKPLANE
    HIT/BASIC,NORMAL,<66.413,413.373,149.932>,<0.0106806,-0.3255548,0.9454628>,<66.437,412.166,149.892>,USE THEO=YES
    ENDMEAS/

    This is one of the measurements that are way off. Is the above what you are looking for?

    Leave a comment:


  • DAN_M
    replied
    Capture.PNG

    Leave a comment:


  • metz317
    started a topic Z Axis Dimensions Issues

    Z Axis Dimensions Issues

    I recently wrote a program for our DCC machine and everything is looking good but, when looking at the graphic display window, my measurements are floating above the CAD model and it's throwing off all of my Z dimensions. I show my origin on the CAD along with my alignment features but, all the other points are in space. Any ideas?

Related Topics

Collapse

Working...
X