Help with motion error

[kpaver]

I am a new user with PC-DMIS currently using 3.5 cad++. Have a PH9A probe head and a TP2. Not using a rotary table or tool changers. When trying to calibrate a tip I take first manual hit press continue in the Execution mode options box, and up pops a cmm error that reads motion errer 050. I believe the zero behinde the five is a square. Not sure what any of this means. Any and all help would be great.

Thanks
Kp

[Tested]

I would try to thin down what might be going wrong. Try to calibrate a different tip and see if you get the same thing.

[John Kingston]

Dirty scales?