Scanspeed?

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Scanspeed?

    Curious how fast you normally can scan and/or take hits with the SP600?

    I have my touchspeed and scanspeed turned down to 5mm/s atm, and just trying to get an idea of how the compares to others using this type of probe.

    Thanks
    Mr. Comment
    SCIROCCO-NT 13-20-10
    B3C-LC Controller (Leitz Protocol), SP600M, TP200
    PCDMIS CAD++ v4.3 MR1(Build: 12/11/08)
    sigpic

  • #2
    Cannot tell you about the SP600 as we use SP25M but it does depend on the severity of the surface curvature, you can obviously scan faster on a flat surface slowing down as the curvature increases.

    I always try and scan at the speed I qualify my tips at wherever possible as this should give the most accurate results.
    sigpic

    Comment


    • #3
      Lower Matrix?

      I agree with jon_dav_uk:
      "depend on the severity of the surface curvature, you can obviously scan faster on a flat surface slowing down as the curvature increases."

      One other thing that I was thinking about with your SP600, have you performed a lower matrix calibration? Make sure that you complete it with the 8x50 probe.
      sigpic
      "You cant vote 'present' as the President of the United States"

      Comment

      Related Topics

      Collapse

      Working...
      X