TR-FG 119 Amplitude Error

  • Filter
  • Time
  • Show
Clear All
new posts

  • TR-FG 119 Amplitude Error

    PC D-MIS 3.7 MR-2 with Catia V5 R15 DCI
    Alpha image 25-50-15 with Leitz controller.
    Machine is about 1-1/2 years old.
    We are now getting TR-FG 119 Amplitude error.
    I am told it happens intermittently when traveling
    to the extreme X plus end of travel.
    When it happens the machine locks up and must
    be re-started (homed, etc.)
    Is there a book of error codes
    (Maintenance says none came with machine).

  • #2
    Nope, there is no list of error codes, that would give too much power to us poor operators.

    First thing: Clean the ways and encoder stip (CAREFULLY!) and see if it goes away.
    Originally posted by AndersI
    I've got one from September 2006 (bug ticket) which has finally been fixed in 2013.


    • #3
      had the same problem cleaned scales dust behind reader head and found loose limit switch
      3.7 MR4


      Related Topics


      • phil george
        Amplitude Error
        by phil george
        What is it and what is the cause? It only happens occasionally on our Global machine in the middle of running a part.
        01-05-2007, 10:43 AM
      • Sinned
        Tacho / Overspeed Error
        by Sinned
        Does anybody have any idea why the following errors would start showing up on the CMM? (we run PC-Dmis3.7 MR3 on a B&S Global - Status machine)...
        01-21-2010, 07:19 PM
      • PATRICK P
        Amplitude Error?
        by PATRICK P
        Good day all
        I have this machine error, and was wondering if any one could lend a hand.
        It is happening in one spot at first however now...
        03-04-2008, 11:44 AM
      • vhans
        Amplitude Error
        by vhans
        Hey Guys,

        Unfortuately Harricane Ike came through Houston and cause losts of damage in the surronding area. I believe Ike got to my CMM...
        09-17-2008, 02:39 PM
      • Kevin Watts
        emergency error
        by Kevin Watts
        has anyone ever seen this emergency error. my cmm came on fine this morning and during calibration of tips it stopped and displayd this error.
        07-30-2007, 10:48 AM