Data from alignment to hyper-report

[robin_p]

Hello,

I am trying to get the X,Y,Z translation and the rotation from a bestfit alignment into a hyper-report.
Only the data 0.026, -0.019,0, -0.008.
The alignment is:

A3 =ALIGNMENT/START,RECALL:A4, LIST= YES
ALIGNMENT/BF2D,ZPLUS,LEASTSQR,ROTANDTRANS,0.026,-0.019,0,- 0.008
SHOWALLINPUTS=NO,SHOWALLPARAMS=NO
ALIGNMENT/END

What I am looking for is sompthing like:

ASSIGN/V3 = A3.X.DATA

Any help would be great.

Thanks,

Robin Peeters

[cmmguy]

Do you want the alignement matrix?
What if you create a construct a 3d Line before you do the alignment and then report that line after the alignment.

[Don Ruggieri]

One Way

This is one way to get that information

A1 =ALIGNMENT/START,RECALL:ALL_SO, LIST= YES
ALIGNMENT/BF3D,LEASTSQR,CREATE WEIGHTS=NO,ROTANDTRANS,-0.004,0.007,-0.001,0.013,-0.013,0
SHOWALLINPUTS=NO,SHOWALLPARAMS=NO
ALIGNMENT/END

ASSIGN/V1 = GETCOMMAND("Best Fit 3d Alignment","Up",1)

ASSIGN/V2 = GETTEXT("OFFSET",1,V1)
ASSIGN/V3 = GETTEXT("OFFSET",2,V1)
ASSIGN/V4 = GETTEXT("OFFSET",3,V1)

COMMENT/OPER,NO,V2
,V3
,V4


V1 is a pointer to the command

V2, V3, and V4 use V1 to extract specific data from the command

[robin_p]

Perfect

Thanks for the replay, this is the code I was locking for.

Now I can compleate the report.

Thanks

Robin Peeters