4.1 problems with hyperreporting

[cmm_quality]

I have been using 3.7mr3 for years and recently upgraded to 4.1.
I have several hypereports that I would like to reuse and or modify slightly.
I can do this easily if I use 3.7, but cannot figure out how to do it in 4.1.

Ex: text1.text=dim1.x.meas

I guess my question would be, what is the recommended method of getting results onto a preformatted inspection report, without having to cut and paste? Something the people on the floor are familiar with.

thanks

[cmmguy]

From what I have heard from the "4" heads here is: You can use your old Hyperreports but you can't edit/change them in 4.x

[Don Ruggieri]

HR choices

From what I have heard from the "4" heads here is: You can use your old Hyperreports but you can't edit/change them in 4.x

CMMGuy is right. You can execute hyper-report but not edit them in v4+

Choices are -

1) execute as is
2) modify in old (v37) version and port to v4+ again
3) convert to "custom reports

3rd option might only be available in v42, not sure

[JamesMannes]

Or you can create a "form". I haven't tried to convert to custom report a hyper-report in 4.2 yet, I will try on Monday and post back here.