TR_FG168,X Help me

[bamsek]

Elou,

We are building our experience by our mistakes or solving the problem.
From this morning we have a problem:
This monit appear's immediately, when machine move i X axis:
TR_FG168, X Reference Mark Synchro Error (Machine Errors)
Move Absolute to X=3796.46 Y=-341.77 Z=1089.38 (Machine Commands)

Machine: Mistral 070705 is not very old from 2001, after change controler to PH10-2.

Can we check or do something before service coming?
What could be the reason to that failure?

Regards

[japiedutoit]

tr_fg168,x reference mark synchro error is the same error code we have found on our dual arm machines. Have you been able to fix it, if what did you do.
Thanks
Japie

[pwhitsa]

Sound like a loose x axis limit switch.
If you get this error the controller cannot find the limit switch when homing.
If this comes up before you home the machine the limit switch may be damaged and is sending when it shouldnt.