Tweet
Does anyone have any information on any Scanning equipment usable for Sheffield CMMs? Doing a little investigating on the possibilities. What would you have to upgrade? I know you need an uprade on the controller, what else?
-
I used to be high on life but I built up a tolerance.
Brown & Sharpe Global Advantage
PCDMIS CAD++ v2011mr2
PH10MQ/SP600M
sigpic -
Depends aloot on your system, if I remember correctly. -
Analog scanning on your discovery would require an SMP400 upgrade. The SMP3xx series controllers did not support any Renishaw analog scanning equipment. I dont know if the new generation controllers that they are putting on the B&S from Sheffield allow scanning or not. Bottom line - new controller.Originally posted by Underspec View PostComment
-
Multi-wired probe head as well, upgrade somewhere near £30,000 for analog capabilities. That's my quote for upgrading a Scirocco, might be more for a Sheffield, have got some training thrown in though!Bristol Citysigpic
Home of the RedsComment
-
I'm using v3.7MR1 CAD (not CAD++). I'm looking to get the scanning feature. Is this available as a module? or only in the CAD++ version?
...06-28-2006, 10:47 AM -
Hello,
In our mould shop we have start to use PC DMIS for electrode measurements and for core/cavity measurements.
From...09-15-2014, 03:55 PM -
I'm looking at adding scanning capability to one of our CMMs, and purchasing an SP600M scanning head to go on my PH10M. I'm currently running both PC-DMIS...11-30-2010, 05:21 PM
-
Guys,
Could someone point me in the right direction as far as where to look and what other questions to ask. Here is my situation....07-07-2011, 10:18 AM -
Hello!
Running PC-DMIS 2018 R1 on a B&S MicroXcel PFX (which I think is similar to a Global S?)
---------------------------------------------------------------------------------------------------------------------------...10-19-2018, 08:53 PM
Comment