Could anoyone please tell me the difference between a DCC-CMM and a CNC-CMM or is there any at all?
CNC vs DCC
Collapse
X
-
Mitutoyo calls their machines CNC driven. I believe the difference, if there really is one, is in the form of the feedback to the controller. One uses encoders (CNC) the other scales (DCC). At least this was the sales pitch I got several years ago. I've run both and if there is a difference, it's totally transparent to the operator.
Bill
Comment
Related Topics
Collapse
-
by littlejoeI lost my job as a CMM programmer/operator after several years, doors closed back in June. Seems to be the way for many shops here in northern Michigan....
-
Channel: PC-DMIS for CMMs
10-31-2007, 12:03 AM -
-
Both machines use the same program and it's written on the DCC, how do you write a code to skip the simple manual alignment for the DCC when running the...
-
Channel: PC-DMIS for CMMs
03-30-2010, 05:10 PM -
-
by rdbowmanI am currently running a manual 765 micro xcel machine with pdcmis ver. 3.2063. My company is looking at buying a new 775 ONE machine. I have around...
-
Channel: PC-DMIS for CMMs
03-21-2007, 12:09 PM -
-
by OctopussjumpAny suggestions for a new CMM that would be kept in a climate controlled QC office and would have the ability to be programed with PC-DMIS and run in...
-
Channel: PC-DMIS for CMMs
12-19-2007, 12:26 PM -
-
by metrologiaHello,
it ocurrs since yesterday: each time I want to measure a sphere (in DCC) in a iterative alignment , or when I want to measure...-
Channel: PC-DMIS for CMMs
12-07-2006, 02:48 PM -
Comment