Tweet
PCDMIS3.7 IAM HAVING A HARD TIME RE CALLING A EXISTING PROGRAM,WHAT IS THE BEST WAY TO DO IT.
-
PCDMIS3.7 IAM HAVING A HARD TIME RE CALLING A EXISTING PROGRAM,
WHAT IS THE BEST WAY TO DO IT.Last edited by cristian anabalon; 12-15-2006, 04:23 PM. -
Cristian, Are you trying to recall the alignment from one program into another?sigpic
James Mannes -
no difrent part same programComment
-
I'm sorry but I dont understand your question?
Can you be more specific on what exactly you are trying to do?
ThanksMr. Comment
SCIROCCO-NT 13-20-10
B3C-LC Controller (Leitz Protocol), SP600M, TP200
PCDMIS CAD++ v4.3 MR1(Build: 12/11/08)
sigpicComment
-
If it is not in the drop down list you will have to hit open and use the path to it(where you have it saved)sigpic
if you had soap on a rope it would be tied to yer ankleComment
-
I am trying to use one program for two different CMM's. I am trying to have an external alignment for each CMM due to the home position being different....10-02-2008, 07:59 AM -
I'm trying to see how I can have a main program run items in another program. I think it can be done using the "external part program", but...10-23-2009, 02:56 PM
-
Last week I wrote a 2 part program. I saved an alignment from the first part program and recalled it in the second program. It worked fine.
...04-14-2009, 04:11 PM -
hello everyone what i am trying to do is have one program for 2 different size machines one is 7-10-7 and the other is a 9-12-8 both have the same scanning...11-05-2018, 11:29 AM
-
Im seeing a popup saying external alignment not found. when opening the program. my company sent this program out to be "fixed" now I just get...07-02-2018, 08:28 AM
Comment