Tweet
Our company has an older cnc cmm. The software that came with it is outdated and we would like to upgrade. What reseller would you guys recommend for a Pc-Dmis retrofit?
-
-
The closer to you the better. I'd recommend going to anyone other than B&S dirrectly that way when it comes time to get service you can go to who you bought it from. If you buy from B&S you don't get service until you 30th machine purchase.
Craig<internet bumper sticker goes here> -
Our main concern with purchasing the software is the price. I would like to find a reseller that could give us the best price and service around.Comment
-
That is usually "fixed" by Hexagon. Nothing like finding a competitive product to make them take notice though.Comment
-
So we are sol?Comment
-
There is a slight learning curve with the DEMON. How old & what kind is your cmm. There could be retrofitting involved $$$$$. Alot more then just buying software, which is $$$$$.sigpic.....Its called golf because all the other 4 letter words were takenComment
-
depending on your machine you may have to upgrade your controller and that together with the software can be quite expensive ($40,000-$60,000).Comment
-
I am tempted, so tempted right now........I mean the first word is already spelled out........so tempting..........then he asks if he is SOL...........I have to go now before I get banned..........<internet bumper sticker goes here>Comment
-
Craiger Great to see you have some control. HA HA Can't stop laughing. It would be fun though.Time for the Trolls to leave.Comment
-
Not at all
If you let me know your City and State, I'll hook you up with a Sales Professional that will guide you through what will be needed to upgrade your machine.Comment
-
One post, Rhode Island, uses the words "Sales Professional" together.....Comment
. One of the monitors must of tipped him off.
-
In June of 2007 we purchased a new Brown & Sharpe Global 12.15.10 machine. As part of the deal we had Hexagon upgrade our LK CMM to PC-DMIS. Now...Yes75.00%36No25.00%1206-10-2008, 08:20 AM
-
Hi All,
I was just wondering if anyone has had a Dea CMM retrofitted from PC-DMIS TO CALYPSO.
The company that I work for is considering...08-23-2006, 08:21 PM -
Hi All,
I need some feed back. I am currently using a very reliable B & S 7-10-7 XCEL with 3.207 beta and have found it to be the best...09-20-2006, 01:32 PM -
My new boss wants me to investigate the cost of CMM maintenance agreements so I thought I'd drop by here and see who has any advice about them, or who...11-14-2007, 10:51 AM
-
Ok so there is a potential for us to get a new CMM. I am wondering what the community would recommend - brand - software etc. I know there is a lot...11-18-2013, 12:24 PM
Comment