? about alignments in loops

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • bob mappes
    replied
    yes, I am dimensioning inside the loop.

    Tech suggested the "pattern" approach for a different issue. I tried it for the other issue and it did work for that, but it was just a work around not a solution.
    My approach on programming is that the "pattern" is good stuff, but "looping" is great stuff.
    Looping creates one set of features in the program.
    Pattern creates potentialy huge programs.
    If the customer makes a change inside the feature set, in a "loop" its pretty easy to change, in a "patter" could be a nightmare trying to find all the items to be changed.
    So, to me looping is the better, quicker, neater choice.

    still have my original issue in this thread though

    Leave a comment:


  • ag162
    replied
    Hello,
    I agree with the measure-dim, before proceeding with the loop, then all results will be relevent with the current alignment.

    A.Gore

    Leave a comment:


  • Schrocknroll
    replied
    Why don't you copy and paste with pattern instead. It might work better for what your doing.

    Leave a comment:


  • Cumofo
    replied
    The part should be dimensioned during the loop. Once the loop ends the previous alignment is in effect and all dimensions are reported to it. Or rotate the alignment for each set when all is said and done to get the reported values to match the print statements.

    Gabriel

    Leave a comment:


  • bob mappes
    started a topic ? about alignments in loops

    ? about alignments in loops

    I have a part the has a feature set rotated 4 times. In this set there are 2 holes called out from other features of the set.

    Now I have looped the feature set and was succesful at probing all features. I had applied tolerances inside the loop to get all results in the Last Execution Report.

    My question is about the alignment inside of the loop...it was applied in order to probe the 2 holes, but the results do not reflect it in any but the first set. The numbers are way off.

    any thoughts on this one?

    thanks
    bob

Related Topics

Collapse

  • GOFOBROKE
    Rotating Alignment in Loop
    by GOFOBROKE
    I have recently been thwarted into the position of programming our CMM with PC-DMIS... I have successfully created a loop to measure holes in a pattern,...
    09-11-2015, 12:05 PM
  • Donny Wallbanger
    Looping a Loop?
    by Donny Wallbanger
    Good morning all I hope you are all having a good day, I have a program that contains a simple loop to check multiple pockets on a valve rotator body,...
    01-13-2017, 05:37 AM
  • JamesMannes
    Looping
    by JamesMannes
    Hi folks,
    New to looping and having a problem. What I have is 4 parts in a row going left to right. I first tried to use my original alignment and...
    04-12-2007, 08:43 PM
  • arock
    looping??
    by arock
    Trying to figure out this looping.... I got as far as taking the first feature of the alignment on the second part! Then it went way over in space and...
    06-14-2018, 09:44 AM
  • MihaelR
    Change alignment in loop
    by MihaelR
    Hi,

    I have a program that measures on a pitch circle some nubs. After this measurenent, the same thing has to be measured, but on a smaller...
    03-26-2017, 05:20 AM
Working...
X