moving program to operator mode

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • moving program to operator mode

    Good Morning All
    I would like to ask how do I go about moving a program I wrote to the operator mode. I know where the program is and I know what folder I want to put it in, but I want to make sure my thinking is right before I do it so I do not mess it up.
    Since I gave up hope I feel much better !!!

  • #2
    You don't have to move the program. You can load up any program from operator mode. What is it that you are actually trying to do?
    I used to be high on life but I built up a tolerance.

    Brown & Sharpe Global Advantage
    PCDMIS CAD++ v2011mr2
    PH10MQ/SP600M


    sigpic

    Comment


    • #3
      There is a folder for the customer of the job and I just wanted to move the program file to that folder. I was planningon just copying it to that folder but was not sure if there was something different I should do.

      Darn forgot again global image 3.7 mr2 :-)
      Since I gave up hope I feel much better !!!

      Comment


      • #4
        Just copy the program,probefile & cad model to the folder.
        sigpic.....Its called golf because all the other 4 letter words were taken

        Comment


        • #5
          Big thing is the probefiles.
          I used to be high on life but I built up a tolerance.

          Brown & Sharpe Global Advantage
          PCDMIS CAD++ v2011mr2
          PH10MQ/SP600M


          sigpic

          Comment


          • #6
            OK thanks at least there is no cad model :-)
            Since I gave up hope I feel much better !!!

            Comment

            Related Topics

            Collapse

            Working...
            X