I have had this many times now. I build a program where I need to change the tp20 mod. for a new tip. I go in to calibrate this tip and the machine brings up a screen for a 2 arm to be calibrated. I can calibrate my probe with no problem but I must shut down the system to get rid of the window for the second arm. And must shut that down as it stops all further programing.
calibration in 4.1 glich!!
Collapse
X
-
Originally posted by Tested View PostI have had this many times now. I build a program where I need to change the tp20 mod. for a new tip. I go in to calibrate this tip and the machine brings up a screen for a 2 arm to be calibrated. I can calibrate my probe with no problem but I must shut down the system to get rid of the window for the second arm. And must shut that down as it stops all further programing.sigpic
Originally posted by AndersII've got one from September 2006 (bug ticket) which has finally been fixed in 2013.
-
Related Topics
Collapse
-
by mfarre03New to Pc-Dmis, CMM and of course the Romer. The current probe body (5024SC-0237) and tip (6mm) was changed to a (3mm) tip using the same body. This...
-
Channel: PC-DMIS Portable
08-21-2009, 01:45 PM -
-
by Guestwhy does this box randomly pop-up while i'm calibrating tips? our machine only has one arm.
EDIT: then when the calibration ended the box...-
Channel: PC-DMIS for CMMs
08-10-2006, 10:08 AM -
-
by Don-ARIWe have a Faro arm that the operator showed me has a feature that tells that the tip is in calbration. Now I know very little about this but is it possible?...
-
Channel: PC-DMIS Portable
05-23-2012, 02:12 PM -
-
by Otto Square"Read Position Requested"?????
This is the warning I get when PC-DMIS crashes on me. The machine stops working and when I hit...-
Channel: PC-DMIS for CMMs
02-26-2009, 04:36 PM -
-
by olderjeepSome times when calibrating a probe this window pops up. After this occurs I save the program and exit out of PC DMIS completely... then go back in continue...
-
Channel: PC-DMIS for CMMs
11-07-2007, 02:23 PM -
Comment