Can anyone tell me the difference between the pcdmis and the opendmis. i have the open dmis software
pcdmis and open dmis
Collapse
X
-
Open DMIS is a product sold by Xpect Solutions. It is a COMPLETELY different piece of software. It has nothing to do with PC-DMIS (which is sold by Hexagon).
Try this: http://www.opendmis.com/helpdesk/index.asp
The only similarity between the 2 packages is that they can write and read DMIS code. And they are only relatively good at that...
By the way: Hexagon completely OWNS the PC-DMIS development and release chain (they bought Wilcox Assocs; Bill Wilcox being the leader there). Xpect, however, does NOT own their software development. They have a marketing and sales contract with the developer of this software (is Denny He still the main guy there?).
Jan.Last edited by Jan d.; 10-24-2006, 10:55 AM.***************************
PC-DMIS/NC 2010MR3; 15 December 2010; running on 18 machine tools.
Romer Infinite; PC-DMIS 2010 MR3; 15 December 2010.Comment
-
PC-Dmis does not do well at all with any type of DMIS Code. It takes just about as long to edit imported DMIS code as it does to simply rewrite the program all over. While it is nice software, it should be called something other than DMISVegetables are what food eats
Here be the cards I was dealt
B&S Xcel
PC-DMIS 2011 We are all just beta testersComment
-
Originally posted by MeGoetzPC-Dmis does not do well at all with any type of DMIS Code. It takes just about as long to edit imported DMIS code as it does to simply rewrite the program all over. While it is nice software, it should be called something other than DMIS
F(EP27)=FEAT/POINT,CART,174,-19.143,-24.4,1,0,0
CALL/EXTERN,DMIS,M(PCD_AUTO_EDGE_POINT_606),(EP27),174,-19.143,-24.4,1,0,0,$
'THEO_THICKNESS',0,'THEO_THICKNESS',0,'NO','NO',10 0,(),(),(),'SURFACE',0,0,$
1,0,$
0,1,0,0,1,'1','1',2,2,0.2
F(EP28)=FEAT/POINT,CART,174,-47.6,-24.4,0.9996082,-0.027989,0
CALL/EXTERN,DMIS,M(PCD_AUTO_EDGE_POINT_606),(EP28),174,-47.6,-24.4,$
0.9996082,$
-0.027989,0,'THEO_THICKNESS',0,'THEO_THICKNESS',0,' NO','NO',100,(),(),(),$
'SURFACE',0,0,1,0,0,1,0,0,1,'1','1',2,2,0.2Comment
Related Topics
Collapse
-
by afennerJust found out that another company in our corporation uses OpenDmis(I'm not sure which version), I've been asked to help setup a system in which we share...
-
Channel: PC-DMIS for CMMs
08-03-2007, 08:49 AM -
-
OpenDMIS? ~ WTF? ~ Anyone have any exposure to this software? Related to Pc-Dmis?
-
Channel: PC-DMIS for CMMs
05-02-2008, 08:36 AM -
-
Good morning all,
We have a rather large library of Virtual DMIS programs (100+). Can we run Virtual DMIS programs through PC-DMIS??...-
Channel: PC-DMIS for CMMs
09-26-2007, 09:37 AM -
-
by AA/AlteredDoes anyone have experiance using Open DMIS? I saw a job and applied for it but do not know Open DMIS software. If it is similar & it would be like...
-
Channel: PC-DMIS for CMMs
09-30-2010, 12:48 PM -
-
by Perry FisherOne of our die builders has purchased a CMM retrofit and will be running Open DMIS. If it is possible and any of you experts have converted Open DMIS...
-
Channel: PC-DMIS for CMMs
04-12-2006, 10:55 AM -
Comment