Tweet
I am working on a part that calls out a cylindricity I was wondering how this is done on PCDMIS as I do not see a symbol for it in the demension bar.
Global image 3.7 mr2
Global image 3.7 mr2
-
Since I gave up hope I feel much better !!! -
Circularity for a circle will give you cylindricity when you measure a cylinder.When in doubt, post code. A second set of eyes might see something you missed.
sigpic -
Thanks JohnSince I gave up hope I feel much better !!!Comment
-
No problem. Looks like it is almost time for a beer!When in doubt, post code. A second set of eyes might see something you missed.
sigpicComment
-
I am running 3.7 MR2 and am wondering what would be the best way to find the cylindricity of a feature since it is not available in this version. Is...09-25-2006, 02:47 PM -
Am I assuming correctly that pcdmis uses Concentricity as the 14.5 equivilant of Circularity? To check a substitute for cylindricity I could measure circles...04-21-2010, 02:00 AM
-
Good Afternoon Everyone:
I am looking for some advice on whether to choose a circle or a cylinder for a od/id measurement. As the only...05-02-2016, 03:49 PM -
Question with PC-DMIS and cylindricity. Does PC-DMIS treat cylindricity just like roundness?? I understand the GD+T standard as cyindricity to control...02-26-2007, 03:46 PM
-
Hi, guys. We are having a dispute over how best to create cylinders to achieve cylindricity. This is for a bore diameter that has a tolerance of ±0.0095...10-12-2016, 01:41 PM
Comment