The exit move or clearplane could be out of machine parameters, or even the diameter field could have no decimal or a non numerical value.
usually a stall is from the program looking a few lines ahead and finding an error.
Gabriel
-
Ver 3.7 BUG??
I posted this already, but do see it in the forum, so I'll post again
My boss is installing 3.7 in N.C.
I run 3.5 myself, and am unfamiliar with 3.7 bugs
Here is what he has come accross:
Auto Circle
when executing, probe will dive into id about 0.5mm and stay there. It will not move, the machine is running, but the probe stands still
He has prehits, perms and init's, no of hits, dia etc, etc....
what could this be??
TIA
-
What are the advantages of going from 3.5 to 3.7 mr3
from reading post it seems like 3.7 mr3 still has a few bugs?03-25-2006, 10:52 AM -
I down loaded 3.7 MR3. I started writing a new program to try it out. When I tried to run the porgram I got a error message that the machine was out of...05-23-2006, 05:12 PM
-
I have my boss in N.C. installing PC Dmis 3.7 & DATAPAGE on a machinr there for a sister-company.
I run 3.5 myself, and am not familiar...03-28-2006, 12:01 PM -
Why would someone pay the exorbitant amount of money that Wilcox/BnS charges for the SMA and then not use any version that has come out since 3.5 MR2?...07-25-2006, 08:25 PM
-
One of our plants just upgraded to 3.7 Mr3 from 3.5. Now they say when running old programs the programs will run half way through and stop running and...09-12-2011, 01:22 PM
Leave a comment: