Could anyone tell if it is possible to have the 4.1 report printout the number of dimensions out of tolerance like it used to be in 3.7 where that number showed up as part of the footer?
Report #of dim's out of tolerance
Collapse
X
Related Topics
Collapse
-
by Jonathan SI never paid any attention to this but one of the engineers asked about it. At the end of the report it says OUT OF TOL = X
The number reported...-
Channel: PC-DMIS for CMMs
10-08-2008, 01:41 PM -
-
by HardyM1I've created a program on our cmm but the problem is that at the bottom of the report where it states # out of tolerance, it is telling us that we have...
-
Channel: PC-DMIS for CMMs
02-19-2013, 08:19 PM -
-
by FOG_CarterHello All,
Is there a way to report features without including the tolerance. The reason I ask is that we have an engineering requirement...-
Channel: PC-DMIS for CMMs
06-18-2018, 04:37 PM -
-
by mattfurtawI have used the "report out of tolerance features only" before but for some reason I can't seem to find out where to do this at. Any help ?...
-
Channel: PC-DMIS for CMMs
10-12-2009, 03:10 PM -
-
by DJLewisMost of our inspection jobs on the Brown & Sharpe have well over 100 reported features and dimensions, up to 22 pages worth. When we had v3.7, Every...
-
Channel: PC-DMIS for CMMs
05-13-2013, 02:10 PM -