Tweet
How do I change the distance the probe moves from the calibration sphere after calibration is complete. I dont know what in the world happened last night, but a bunch of the settings have been changed, the probe now errors out after calibration is complete. (machine parameter out of tolerance) 3.7 MR2
-
-
Parameters Settings,,Motion You can change your distance theresigpicSummer Time. Gotta Love it!
-
Under your PROBE SETUP (same plce you go to CALIBRATE the probe) there is a little setup button that lets you adjust many, many wonderful things, one of them is the height above the ball it moves to.sigpic
Originally posted by AndersIComment
-
Thanx
I knew that I was missing something simple...Setup in Probe Cal Window worked like a champ--brain not working on a cylinders this morningComment
-
Hi everyone in PC-DMIS land. I have a problem that I am sure you can help with.
I am trying to calibrate my probes, which I have done many times...01-08-2008, 03:52 PM -
Is there a way to force the probe to over travel or seek for the calibration sphere? I am about a micron away.11-29-2012, 10:58 AM
-
Does any one know the setting for the back off while doing the probe cals? we have mounted our cal shpere up on a riser and it runs out of travel if the...09-07-2007, 09:53 AM
-
Sorry to ask an old stuff question.I lost track of probe setup things.
some how my probe calibration is going funny. the start point for calibration...05-30-2007, 10:17 AM -
I am running v3.7 mr3
Ocasionally when doing a probe calibration on a program that has been executed 100's of times, the calibration...05-10-2006, 12:13 PM
Comment