Analysis graphics size at print

[dwade]

Running V3.7MR3 and on one CMM the anaysis will print 2 graphics on one sheet of paper but on another it will only print one per sheet of paper. I have made sure the printer settings are identical (all HP laser printers), font sizes are the same. Dont' know where else to look. How can I change the size of the print output? or can't I?

Duane

[#2#]

I know I've played around with this before. Give me a few minutes and I will see what I can come up with.

[#2#]

For 3.7mr3 if you go File-printing-graphic window print setup, a window will open. In this window there is a checkbox for "scale to fit on a single page" It appears this is what you want. I would bet it is checked on one cmm and not the other.

[dwade]

Tried changing all of the printer settings and one CMM still prints out 2 per page and the other still prints out 1 per page. Any things else come to mind?

[#2#]

Nope, I think that is all I had to do.

[Maqboul]

I do not know what kind paper you are using , Try to use A4 as paper size...

HTH
Maq

[Underspec]

If you mean you get two graphical analysis, go into your dimension that you analyized (F9) and see if the graphical output is checked.

Sounds like you might have this checked and also have the analysis inserted.

[dwade]

If you mean you get two graphical analysis, go into your dimension that you analyized (F9) and see if the graphical output is checked.

Sounds like you might have this checked and also have the analysis inserted.

I am trying tosave paper in a report. It is not repeating the same analysis omn the same page. One CMM give me 2 per page and another CMM gives my only one per page which takes up an extra 4 or 5 sheets of paper......