Version 4???

[Gary Fitzgerald Ultra Senior Member Find all posts View Profile Close Gary Fitzgerald]

Has version 4 been officially released by Brown&Sharpe or only by Wilcox???

[Mike N. Senior Member Find all posts View Profile Close Mike N.]

wilcox only
use at your own risk

[rebeldude Senior Member Find all posts View Profile Close rebeldude]

I downloaded the New Version 4, but I am afraid to use it yet. I am as of now happy with 3.7 MR3.

[Paul Sarrach PC-DMIS Guru Find all posts View Profile Close Paul Sarrach]

ver 4 was shelved, you have to load 4.0 mr1

[tenndoc Senior Member Find all posts View Profile Close tenndoc]

Wow, v4 was off the shelf for - what - less than a week and they've already come out with mr1.

I'll say it again, Wow.

[Paul Sarrach PC-DMIS Guru Find all posts View Profile Close Paul Sarrach]

B&S= Browne and Sharpe it should be, B&NSS = Brown and Not So Sharp

[kbotta Ultra Senior Member Find all posts View Profile Close kbotta]

Is this an official MR1, or are you refering to the re-release?
Just curious, cannot find any MR1...
kb

[Paul Sarrach PC-DMIS Guru Find all posts View Profile Close Paul Sarrach]

Sorry, it is the re-release. I did not load it. I was going what I was told. I just assumed it was called mr1.

[kbotta Ultra Senior Member Find all posts View Profile Close kbotta]

Ok, I thought maybe I was missing something
Thanx
Kev

[jjewell PC-DMIS demi-Guru Find all posts View Profile Close jjewell]

People,people,people.

I have ranted many times regarding this.

UNLESS you have LOTS of spare time, really know your stuff and arne't afraid of possibly incorrect results, do NOT download the "Newest" version the minute it gets put on the shelf.

As you can all see, B & S re-released ver 4.0, because they found some major issues, what does this tell you ???? ARE YOU LISTENING ??

Let others test it out, again, unless you have nothing better to do.

Nothing worst than your boss coming into the room looking for data on a hot job and expecting it done, but you say," Oh ya, that $3K we spent to upgrade to the latest version, its not working correctly yet, so I may be a while"

Nothing angers management more than stuff like this.

Now, I am not saying don't help the other ppl here and report issues you find, just don't put yourself in a tough spot.

[Don Henger Senior Member Find all posts View Profile Close Don Henger]

B&S are going to upgrade a Merlin CMM on april fools day. I wounder what version they will put on?? I'm still on 3.5mr2 My cohort in crime is on 3.7mr2

[Paul Sarrach PC-DMIS Guru Find all posts View Profile Close Paul Sarrach]

If they want to put one on that works. They need to install the 3.2063

[kbotta Ultra Senior Member Find all posts View Profile Close kbotta]

here here...