point at intersection between arc or circle and a line

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • point at intersection between arc or circle and a line

    Is it possible to create a point at the intersection of an arc and a line? I tried all the options for creating points but the point is not created where the line crosses the arc. I made sure I was in the proper working plane. 3.5mr2
    TIA
    Jonathan S
    pcdmis 2009
    G&L CORDAX RS-150 DCC
    B&S global 15-30-10
    DEA Delta Slant 30-100-15

  • #2
    create a "new" line using the "reverse" option of the line you already have, then create the point using this new line...makes all the difference

    bob
    Which one gets ridden today? MPH vs MPG..tough choice, both are FUN
    sigpic

    Starrett RGDC 4028-24 :alien:
    Demon vintages 3.7, 4.1, 4.2, 4.3, 2009

    Comment


    • #3
      arc or curve intersecting to line.

      I know that with the v4.0 you can intersect a curve to a line which we could not do in the past.

      Comment


      • #4
        Make sure to choose pierce point when construction also.
        DCCFreak

        Comment


        • #5
          Thanks, pierce point is the option I didn't try, that works.
          Jonathan S
          pcdmis 2009
          G&L CORDAX RS-150 DCC
          B&S global 15-30-10
          DEA Delta Slant 30-100-15

          Comment

          Related Topics

          Collapse

          Working...
          X