Calculation Method

[jkb_mcg]

I'm trying to check a circle by using an auto-circle. I was trying to explore the calculation method being used. When using max_Insc...It's actually giving me
.1886, when using min_circumscribed, it's giving me .1891

CIR5 =AUTO/CIRCLE,SHOWALLPARAMS = NO,SHOWHITS = NO
THEO/3.81,-28.5,0,0,0,1,0.1886
ACTL/3.8101,-28.5049,0,0,0,1,0.1886
TARG/3.81,-28.5,0,0,0,1

CIR4 =AUTO/CIRCLE,SHOWALLPARAMS = NO,SHOWHITS = NO
THEO/3.81,-28.5003,0,0,0,1,0.1886
ACTL/3.8099,-28.5026,0,0,0,1,0.1891
TARG/3.81,-28.5003,0,0,0,1

[bw_bob]

Max_Insc is for checking ID= the largest stud that would fit into the dia
Min_Circsc is for checking OD= The smallest circle that would fit over a stud
Hope that helped...You could also use your help window.

[Underspec]

This attachment will help answer many questions.