Upgraded to 3.7mr3 and no problems!!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Upgraded to 3.7mr3 and no problems!!

    I upgraded from 3.7mr1 to 3.7mr3 last nite and expected at least a few problems and they reported no problems through out the nite. What a relief as I was expecting at least 2 or 3 phone calls to cmoe in at fix something.

    Did I not do something right?

    Duane
    Xcel & MicroVal Pfx & Global 37mr4 thru 2012mr1sp3
    Contura Calypso 5.4

    Lord, keep Your arm around my shoulder and Your hand over my mouth. Amen.

  • #2
    Don't fret too much....as from experience, I've found the 3.7 family as a whole to be a quite stable platform. I've read in the forum that 4.0 however is the satan bug so I stored away my disks until B&S formally oks 4.1. Enjoy 3.7 mr3, it's quite nice to work with. ..............B
    Physics dictates to man why his world acts the way it does....Chemistry tells him why it smells the way it does.

    Comment


    • #3
      I was thinking along your lines when I upgraded from 3.7mr2 to 3.7mr3, but I haven't noticed anything out of the ordinary either (YET)...
      sigpic
      Xcel 15-20-10 - PFXcel 7-6-5 - Merlin 11-11-7 - Romer Absolute 7525SI
      PCDMIS 2012
      Windows Office XP

      Comment

      Related Topics

      Collapse

      • speedwagonfan
        3.7MR1 to 3.7MR3
        by speedwagonfan
        The guys on first is quitting today and we are currently running 3.7MR1 and have MR2 and MR3 but are not installed. I want to upgrade to 3.7MR3 or...
        06-02-2006, 05:26 AM
      • AuRules
        V4.0 versus 3.7mr2
        by AuRules
        I,m currntly running v3.7mr2 everyday, but I do have v4.0 on my PC. What shall I do with v4.0 because I heard through the grapevine that v4.0 has a few...
        12-07-2006, 04:53 PM
      • Gary McElwain
        Help with 3.7MR3
        by Gary McElwain
        I have been working on getting 3.7MR3 to work on a Sheffield RS50 since the first part of August. I have asked for help from B/S about the problems that...
        11-06-2006, 11:09 AM
      • Master Chief
        FYI - The Latest
        by Master Chief
        In recent dealings with BrownandSharpe, I have been told that the latest version is 3.7mr3. Does this jive with what you have been told? It seems that...
        07-10-2006, 12:14 PM
      • Roger Kilpatrick
        version
        by Roger Kilpatrick
        I have been running 3.5MR2 for quite some time now, well for some reason it took a carp. If you turn on the graphics mode tool bar the whole screen turns...
        02-19-2007, 06:55 PM
      Working...
      X