-
How does the extended length work on a Cylinder. I have four cylinders that I am measuring that are approx. 50 mm in length. The blueprint calls out //...09-17-2014, 08:45 AM -
We have a job on now, it's a housing with an internal cylinder as the only datum on the drawing. I need to check the perpendicularity of all the machined...04-14-2010, 06:30 AM
-
I have 2 (supposedly) perpendicular features.
Why do I get different measurements when I measure perp from A to B and when I measure B to...03-24-2015, 10:07 AM -
Let's say I am measuring the location of a cylinder. When the dimensioning is done is the measurement taken from the center point along the axis and length...06-26-2008, 02:16 PM
-
On the dwg, we need to perpendicular cylinder B to plane A within .012mm
assistant lab manager says the values should be the same if we were...03-14-2018, 11:58 PM