Edit window in Full Report Mode

[dwade]

What I'd like to do is change the color of the out of toleance histogram. It shows yellow when below low limit and red when above high limit. I've tried to find a way to changed but cannot.

I want both to be red!

TIA

Duane

[#2#]

What I'd like to do is change the color of the out of toleance histogram. It shows yellow when below low limit and red when above high limit. I've tried to find a way to changed but cannot.

I want both to be red!

TIA

Duane

I can't help but I bet those who can will want to know what version you are running.

[Underspec]

Did you try going into the edit window layout settings and changing those colors in there? You have to "apply" after you are done for it to stick.

[Paul Sarrach]

Edit, Graphic display window. What version will determine where its at.

[dwade]

V3.7MR1.

I've tried about everything to get the colors changed in the Edit Window Colors dialog box. Edit Griphics disply has nothing in it about changing colors.

[#2#]

Ok, so you are trying to change the little graphical display thingy that prints on the report. It is just a graphical representation of where the dimension falls relative to nominal.

I believe this can be changed but I will have to look into it.

[\v/inston]

Edit\Graphics Display Window>\Dimension Color

Change your out of tol ± to red and the rest to blue. thats how i set mine up and they actually changed the default in 4.1 pretty close to this same way instead of having every color in the rainbow. much easier to say blue good red bad...

[dwade]

Edit\Graphics Display Window>\Dimension Color

Change your out of tol ± to red and the rest to blue. thats how i set mine up and they actually changed the default in 4.1 pretty close to this same way instead of having every color in the rainbow. much easier to say blue good red bad...

Thank you!! I looked right at that several times and the light just never came on!