Tweet
Using 3.6 CAD++: Hope some one can help. Installed an older version of pc-dmis. And now When starting 3.6 It gives me a message that my port lock is missing. anybody know how to correct this.
-
-
I think you are going to have to do something with the HASP drivers
your driver for 3.6 must have got foobared when you did the old version install -
reistalled hasp driver. everything seems ok.Comment
-
In regards to the fact that you are using ver. 3.6, from everything I've read here, B&S doesn't recommend even using that version. But I guess if you aren't having any major issues, forge ahead! Good luck with it! Just passing on some friendly advise!
Mark FarrenComment
-
I’m going to be switching to a new computer next week. We are running version 3.2, but Customer Support told us we could download 3.5MR1.
I tried...02-06-2009, 08:03 PM -
Anybody had this already? When going from 4.3mr1 to 2010mr3 on a Vista computer, the install wants to install new HASP drivers. This seems to fail and...12-21-2010, 09:46 AM
-
I am trying to move PCdmis from an NT4 machine to an XP machine.
PCdmis is version 3.0864, after reading thru many of the threads here, it seems...07-19-2012, 08:45 AM -
I tried running Hinstall and received the error:
Failed to start the Aladdin Device Driver
Failed to start a service in the Service Control...12-13-2007, 12:11 PM -
Hey guys,
Just got a new PC for the CMM. Copied my folders over, but it is giving us an error. "Lock missing - cannot proceed" . When...07-11-2006, 11:04 AM
Comment