V3.7-MR3 BUG~ERROR~ISSUE

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts
    No photos found.

Related Topics

Collapse

  • Mordekai
    Manual Mode Error
    by Mordekai
    Recently, I've been getting a rash of the following errors on my 9159 and 9129 Xcel Machines during initial probe rotations: DOF: M54 invalid machine...
    05-07-2008, 12:41 PM
  • Marc in SW
    Manual retracts
    by Marc in SW
    I have a Tesa micro-hite 3D, pcdmis 4.2, sheffield controller. I and doing setup and in the manual mode I want to change the retract. I am using the 1mm(.039)...
    03-07-2008, 08:12 AM
  • Nevets
    Dof : M54
    by Nevets
    I just updated from 3.7 MR2 to 3.7 MR3 and I keep getting an error on the move point after a wrist change. The error is " DOF : M54 invalid machine...
    08-06-2007, 01:16 PM
  • Paul Sarrach
    Pcdemons_ Alignment ??????
    by Paul Sarrach
    Okay, I have done this a million times but this time ????

    Okay, I have three tooling holes, in the first program I would mark all and...
    04-03-2008, 11:03 AM
  • grandpaal56
    Machine Error
    by grandpaal56
    FIRST, I WOULD LIKE TO THANK ALL OF YOU FOR ALL THE USEFULL INFO YOU HAVE GIVEN ME IN THE PAST, WITH THE COMBINATION OF ALL OF YOUR EXPERIENCE, YOU GUYS...
    06-03-2008, 11:34 PM
Working...
X