Looping

[B. Jacobs]

I know this has been touched on but I don't get it.
I have been ask to set up multiple parts and loop the program so they will run. I have read the HELP file (with no help there), but I can't seem to get it to work. I have the program writen and am inserting the Loop command, then at the end of the program I have the End Loop. I have the second part 7 inches away in the X. The Y and Z have not changed. When it gets done with the first part it wants to go the the first part origin and go down in the Z. Not sure what is going on. This is the first time I have used this Looping thing.
I did read the other post about looping but am just as cunfused as before. I hope someone has a plain English way to try.
Thanks in advance


3.5MR2

[tking]

Bryan,

Check your email

TK

[TRD_racing]

B. Jacobs
This is how I did my looping program. It may not be the best way to code but it works. Hope this helps you.

[tking]

B. Jacobs
This is how I did my looping program. It may not be the best way to code but it works. Hope this helps you.

Nice job, Dale. I'll step out of this now. I think you'll get Bryan squared away with this.

TK

[B. Jacobs]

King,

Check your email.

Thanks