Ellipse Perimeter

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Ellipse Perimeter

    Is it possible to measure Perimeter of an ellipse? v3.5 MR2

    Thanks!!

  • #2
    Did you try the help menu? Elipse is an autofeature in 3.7MR3. HTH
    sigpic"Hated by Many, Loved by Few" _ A.B. - Stone brewery

    Comment


    • #3
      elippse inside, or top?

      Do you mean the inside of the ellipse? This is an AutoFeature function.

      If you meant the top surface around the ellipse, this is a perimeter scan.

      Both depen on the version you are using, as they are (relatively) recent enhancements.

      Comment


      • #4
        Measuring ellipse is OK but having hard time to dimension its perimeter.

        Thanks.

        Comment


        • #5
          Originally posted by Rockmondd
          Measuring ellipse is OK but having hard time to dimension its perimeter.

          Thanks.
          ..

          Did they give you a length and width call out or they really want perimeter? If you have nominals for the length and width of the ellipse and the part is ok when dimensioned this way then I think theoretically the perimeter would also be good.
          Kevin

          Comment


          • #6
            Yes, customer only wants the perimeter due to it is a plastic part thus out of shape badly. I found another method (OGP) to measure it.

            Thanks.......... Everybody.

            Comment

            Related Topics

            Collapse

            Working...
            X