Manual TTP Scan

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Manual TTP Scan

    I am still new with Pc-Dimas and I am trying to do a manual scan, but when I go to the Insert-Scan drop down menu all scaning methods are listed grey, accept the last segment from circle and down. What do I have to do to make the other options available. I am running ver 4.0. on Zeiss eclipse.
    Pc-Dmis 4.2, Zeiss Eclipse
    sigpic

  • #2
    What version of Pcdmis do you have and what classification?

    I have V3.7 MR3 CAD++

    If you have just the very basic classification of Pcdmis, scanning may not be part of it.
    sigpic
    Originally posted by AndersI
    I've got one from September 2006 (bug ticket) which has finally been fixed in 2013.

    Comment


    • #3
      Did you switch to manual mode first. My option only comes up if I take it out of dcc mode
      sigpic
      if you had soap on a rope it would be tied to yer ankle

      Comment


      • #4
        You have to have DCC off before you can do your manual TTP Scan
        I used to be high on life but I built up a tolerance.

        Brown & Sharpe Global Advantage
        PCDMIS CAD++ v2011mr2
        PH10MQ/SP600M


        sigpic

        Comment


        • #5
          Ok. I got it going in manual mode, but now I am getting error msg. "Hit taken outside tolerance zone.Distance=10" Even try it on surfaces I know they are ok, still the same error.
          Pc-Dmis 4.2, Zeiss Eclipse
          sigpic

          Comment

          Related Topics

          Collapse

          • eg92b16a2
            Manual TTP scan
            by eg92b16a2
            Good morning,
            I am trying to figure out how to do a manual ttp scan. I am on PCDMIS 4.1 with only CAD. Engineering needs me to scan a groove and...
            05-30-2007, 02:29 PM
          • Willigan
            Scan with TP20?
            by Willigan
            So I need to do a patch scan to create a surface on a part and do a profile of surface dimension. The reference manual leads me to believe that all I...
            06-28-2006, 12:17 AM
          • BEAVERSC
            Manual Scan
            by BEAVERSC
            We have recently purchased a manual CMM with PC-DMIS CAD. When we try using the manual scan the numbers will not repeat. Anyone have any ideas?
            07-30-2007, 05:01 PM
          • MOREPOWER2U
            LSPX1S not scanning
            by MOREPOWER2U
            LSPX1S will not scan in analog mode. Only wants to do TTP?
            01-02-2013, 01:34 PM
          • william
            Scanning
            by william
            I have never used the scan feature before but i am reading the manual and i am starting to understand it a little but when i try to create a scan by inserting...
            03-16-2010, 12:23 PM
          Working...
          X