I kept rebooting and turning head on and off until I got it going again.
Looks like we need to prepare to spend big bucks.
-
***** is a bad boy word???
Guess so!
(with apologies to the set-screws of the world, screw is now an allowed word on this forum)
-- adminLast edited by Admin; 03-16-2006, 11:08 AM.Leave a comment:
-
It's the little set-screw on the left side of the head, but you didn't hear this from me and you use the info at your own risk.Last edited by Admin; 03-16-2006, 11:07 AM.Leave a comment:
-
PHp Problems
I seem to remember that you could possibly adjust a PH9. I can't get to old forum posts. So would someone please repost Possible adjustments to PH9.
It will lock out in all positions except A0. Then I get Ph9 datum error. Thanks in advance for any help.
-
I've search the threads on these issues and I do believe I know the problem but I just want to see if I can get some confirmation on what I believe. I...04-25-2014, 11:43 AM
-
good morning,
I'm not having any problems and it's good to know the forum could help if I did.
so, thanks for being a "safety...06-20-2013, 07:46 AM -
OK now you know I have the old PH9! at 0,0 (bridge) straight down its not perpindicular to the table. A direction is ok (the 0-105 direction) and off...05-18-2007, 11:12 AM -
As I mentioned in my previous thread , my company has just bought a new Leitz 24.16.12 which is runnning with PC-DMIS 4.3. While I am trying to set up...11-09-2009, 05:25 AM
-
Leave a comment: