Inspection Report Not Printing

[Randy Nehf]

I am having a probem with my inspection report not printing after the program is completed. I have the printing box checked in setup. This just started a couple of days ago and only for the new programs that I have written in those two days. I did a test this morning with a simple program and it is working fine. Any thoughts on this? I am using 3.7 MR3 and am new with this version. I used to have 3.2063. Thanks in advance for your time.

Randy

[djayne]

Are you using marked sets? I have had this problem when using marked sets with the print box checked when I created the marked set. I deleted or unmarked the print command in the program and it printed as normal again. Must be some sort of bug.

[Randy Nehf]

Yes, I am using marked sets. I will try what you did. Thanks for your time.

Randy

[rebeldude]

Hey look!!!,
One of the shortest threads in the whole Forum!!

[Mike N.]

In 3.5 mr2 I found that every time that I create a Marked set (with the printer on) it doesn't save that setting with the set. I have to save, close, reopen and set that checkbox one more time and re-save the program.

that works for me with 3.5mr2

[dwade]

Uncheck the dialog box for draft in your print set up.

I had one prg this morning do that when I moved it to another CMM. It owuld print in draft on one CMM but not on the other.....

Duane