Speed control on jog box

  • Filter
  • Time
  • Show
Clear All
new posts

  • Speed control on jog box

    I'm running 3.7mr3 on a DEA beta with a TU01 jog box. Ever since I upgraded from master to PCDMIS the rheostat speed control on the TU01 does not stop the movement of the machine immediately when you turn it down. The machine coasts to a stop, and at full speed will travel quite a ways before it stops. Is this normal? Can it be changed? It cost me a probe today when I clicked on create an auto point without having a clear plane in place. I reached the rheostat in time, but it coasted into the steel anyway. I don't mind losing a probe, however now the PH9 won't index correctly in all positions. The good news is I will be upgrading to a PH10 now!

    Thanks to all,


Related Topics


  • acgarcia
    Reading Jog Box Speed
    by acgarcia
    Is there a way for pcdmis to read the jog box speed? I walked by a CMM and noticed the speed was turned down a quarter of its max. The machinist operate...
    02-26-2021, 10:37 AM
  • J_Tdmis
    Machine move speed setting
    by J_Tdmis
    We are having an issue with one of our CMM operators constantly spiking the speed on the jog box (I just work here or else he would already be gone)....
    07-29-2021, 06:58 AM
  • Steve R
    Machine speed
    by Steve R
    Hi everyone , I am having a problem with the speed of my cmm my programs and calibration runs slow, even with the speed up to 100%, what can I do...
    12-06-2016, 07:21 PM
  • tnguyen
    Box Control replace
    by tnguyen
    Hi everyone.
    I have tried to call B&S today, but I can't contact them. I think the expert in this forum may help me.
    I got...
    08-10-2007, 10:39 PM
  • dwade
    Consistant measuring speed
    by dwade
    I am trying to solve some issues with people here that always turn the speed down on the jog box to around 50%. I have always told people to use the same...
    02-06-2007, 02:59 PM