Tweet
When I create an auto feature and select a radius from the CAD model it distributes points beyond the radius. Not a full 360 but just beyond either end. Anyone know what it is that I have done? Is it maybe the CAD file?
-
-
Could be improperly trimed curves on the cad-model. This isnt a big deal..just change your start and end angles.
Tim -
I don't think you've done anything wrong and I'm not at all sure it's the cad file, however, you can F9 the feature in the edit window and tighten up the start and end angles and the demon will redistribute the points for you.
.02
TKsigpicHave a homebrew
Comment
-
I've been doing just that but it's happening on all of the radius features on the part. I though maybe I had settings wrong. It has never done this before.Comment
-
Separate the wire and solid into two different layers, you have a layer issue.sigpicComment
-
Originally posted by Cumofo
I thought it migh have something to do with that.Comment
-
After I select an auto feature (any of them) and try to pick the points on the cad model it keeps snapping the points to the origin. No matter where...05-13-2011, 08:07 AM -
Does anybody know why I cannot select different tabs in the auto feature window?
-I have re installed dmis...07-30-2015, 01:56 PM -
I need some advice here. Ok, I started with a new program and imported the CAD model first. I transformed the axis due to the prints coordinates and...03-06-2008, 11:04 AM
-
OKAY... This is really beginning to frustrate me.... I'm using PCDMIS version 3.5 and i'm trying to take actual hits on the cad model. The hits are...09-03-2008, 09:59 AM
-
When I open an old program the Auto Features are suddenly disabled. But only with this one program. It has a fairly large .cad file associated with it...12-08-2006, 11:59 AM
Comment