Tweet
Help-scan!!!
Hi!
I’m student and I write master’s thesis on subject scanning in PC-DMIS program on the different CMM’s. In our laboratory we have CMM Dea Global image clima and PC-DMIS v3.7 mr3. I turn with request on forum to users of PC-DMIS about files with scanning results. If some of users might and would like help me, then I request for realization scan with head sp600 or sp80 or sp25 and with following parameters:
-type of scan: LINEAROPEN,
-scan execute on the table of machine,
-coordinate system construct on plane and points (direction axis take over machine),
-Start Point “1” coordinates (0,0,0), Direction Point “D” coordinates example (0,1,0) and End Point “2” coordinates (0,100,0),
-without Probe Compensation,
-scanning speed 5mm/s,
-NONEFILTER or LINE with Max Incr: 1,
-Execute: RELEARN,
-Number of points/mm = 1,
If someone might execute such simple scan and send him on my e-mail then very help me in realization my thesis. Also I would ask about parameters of CMM on which the scan was execute and version of PC-DMIS.
HELP PLEASE...
MAC
My e-mail: [email protected]
I’m student and I write master’s thesis on subject scanning in PC-DMIS program on the different CMM’s. In our laboratory we have CMM Dea Global image clima and PC-DMIS v3.7 mr3. I turn with request on forum to users of PC-DMIS about files with scanning results. If some of users might and would like help me, then I request for realization scan with head sp600 or sp80 or sp25 and with following parameters:
-type of scan: LINEAROPEN,
-scan execute on the table of machine,
-coordinate system construct on plane and points (direction axis take over machine),
-Start Point “1” coordinates (0,0,0), Direction Point “D” coordinates example (0,1,0) and End Point “2” coordinates (0,100,0),
-without Probe Compensation,
-scanning speed 5mm/s,
-NONEFILTER or LINE with Max Incr: 1,
-Execute: RELEARN,
-Number of points/mm = 1,
If someone might execute such simple scan and send him on my e-mail then very help me in realization my thesis. Also I would ask about parameters of CMM on which the scan was execute and version of PC-DMIS.
HELP PLEASE...
MAC
My e-mail: [email protected]
