Faro Arm ~ Pc-dmis

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Faro Arm ~ Pc-dmis

    Appreciate any feedback on the Faro arm and its use with Pc-dmis from anyone who has used. TY
    sigpicThanks a Millionth

  • #2
    Works good learn how to home points.. IF you go to the section with the arms there should be a lot there. Otherwise ask away.
    sigpic
    3.7 MR4

    Comment


    • #3
      Faro Arm the software is very good , In cad modeling for profile and stuff but the arm is to small you can move the position of arm but you need to recalibrate every time , still good for quick measures , but my boss said 47.000 for a Arm is kind expensive is better buy a CMM
      sigpic
      Always Looking at the Big Picture :D:D:D
      3.7 MR1 CAD++
      4.3 Mr1 CAD++
      B&S (Global 07-10-07) -PH10T/TP20
      B&S (Microxcelpfx) -PH10MQ/TP20

      Comment


      • #4
        Take a look at Romer if you are truly going with an arm.
        FARO has their own software, Romer uses PC-DMIS.
        When in doubt, post code. A second set of eyes might see something you missed.
        sigpic

        Comment

        Related Topics

        Collapse

        Working...
        X