CAD View Level Help

  • Filter
  • Time
  • Show
Clear All
new posts

  • CAD View Level Help

    Does anyone know how to programmatically turn on and off CAD view levels? I am checking a bumper that has two different versions (some various feature changes), and I want to turn on or off different CAD levels based on the model being measure. Any help would be appreciated. Thanks.
    28 Years, 8 Months, 0 weeks and 1 Days until retirement...

  • #2
    Go into your view set up, and turn on and of levels until you find what you need, Usally the levels ending in 2 are the part.
    sigpicSummer Time. Gotta Love it!


    • #3
      Put the data into the levels you want it in Pcdmis (you can have up to 255 levels of data and you can move them in Pcdmis). Then, simply SAVE VIEWs of the different sets of data you want shown, at the beginning of the program. Then, in the program, RECALL a view and when it gets to that command, it will show what you saved in that view.
      Originally posted by AndersI
      I've got one from September 2006 (bug ticket) which has finally been fixed in 2013.


      • #4
        Thank You Much.
        28 Years, 8 Months, 0 weeks and 1 Days until retirement...


        • #5
          Good tip Matt.
          RFS Means Really Fussy Stuff

          When all you have is a hammer - everything looks like a nail....


          Related Topics


          • Msolito
            Setup View problem Please help
            by Msolito
            In the view setup /layout
            If you have 3 view window and you have the same part but in 3 different view and you want to show the hole ID # but...
            10-15-2008, 11:14 AM
          • robehor4
            Cad Views
            by robehor4
            4.1 CAD++
            How do I recall different views of the model to show the inspectors where to take hits during the program.
            11-02-2007, 07:13 AM
          • venkat9
            Cad Levels
            by venkat9
            How to create Levels in View set up window??? For no of cad models in one program?? I tried much using with help file..But I cannot..Can any one suggest...
            09-07-2012, 06:05 AM
          • jstrau
            Changing view default?
            by jstrau
            Using 2009 MR1 for Vision -
            When I open a file it defaults to the Cad view- How do I change this to default to the Live view?

            04-30-2010, 02:06 PM
          • T Miller
            Cad display views
            by T Miller
            I'm not useing a cad model but in the display window.. when you have more then one view showing at a time ..
            Is there away to display a label for...
            05-18-2006, 06:07 AM