Bas code for Get X,Y,Z centrals, of AtiveTip

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Bas code for Get X,Y,Z centrals, of AtiveTip

    Hi to all

    Please, somebody know the bas code for get the X central, Y central and Z central values of active tip?

    Thaks a lot!

    Capture.PNG

  • #2
    Does it need to be basic?

    You can get it like this

    ASSIGN/PROBEXYZ=PROBEDATA("OFFSET")

    COMMENT/REPT
    PROBEXYZ.Z
    Automettech - Automated Metrology Technology

    Comment


    • #3
      I have a function that extracts probe data somewhere. I’ll see if I can dig it up. Never needed to find active probe though.

      Comment


      • #4
        This extracts values from the tips and creates points that matches the values. There was something funky with the measured values out though, they are offset by the radius IIRC. The compensation variables for that is likely not correct for a general application. But the code gives you a rough picture of how to work with probes at least.

        Code:
        Function ExtractTips()
        Dim ProbeLib As Object
        Dim app As Object
        
          Dim pp As Object
          Dim cmds As Object
          Dim cmd As Object
          Dim part As Object
          Dim Probe As Object
          Dim Tips As Object
          Dim DmisCommand As Object
          Dim Point As Object
          Dim Zcomp As Double
        Dim Ycomp As Double
        Set app = CreateObject("PCDLRN.Application")
          Set part = app.ActivePartProgram
          Set cmds = part.commands
          app.Visible = False
          Set ProbeLib = part.Probes
          Set Probe = ProbeLib.Item("XXXX") 'insert probe name
        
          Set Tips = Probe.Tips
        
          For Each Tip In Tips
        
                Ycomp = Tip.diam / 2
                Zcomp = -Tip.diam / 2
        
        
                Set DmisCommand = cmds.Add(CONTACT_VECTOR_POINT_FEATURE, True)
                DmisCommand.Marked = True
                Set Point = Tip.XYZ
                app.Visible = False
                Ycomp = Tip.MeasDiam / 2
                Zcomp = -Tip.MeasDiam / 2
                ' Set Teoretiskt X  = 0
        
                retval = DmisCommand.PutText(CStr(Point.X), THEO_X, 0)
                ' Set Teoretiskt Y  = 0
                retval = DmisCommand.PutText(CStr(Point.Y), THEO_Y, 0)
                ' Set Teoretiskt Z  = 0
                retval = DmisCommand.PutText(CStr(Point.Z), THEO_Z, 0)
                ' Set Teoretiskt I  = 0
                retval = DmisCommand.PutText("0", THEO_I, 0)
                ' Set Teoretiskt J  = 1
                retval = DmisCommand.PutText("1", THEO_J, 0)
                ' Set Teoretiskt K  = 0
                retval = DmisCommand.PutText("0", THEO_K, 0)
                ' Set Rapportvektor I  = -0.3930601
                retval = DmisCommand.PutText("-0.3930601", REPORTVEC_I, 0)
                ' Set Rapportvektor J  = -0.0660101
                retval = DmisCommand.PutText("-0.0660101", REPORTVEC_J, 0)
                ' Set Rapportvektor K  = 0.9171403
                retval = DmisCommand.PutText("0.9171403", REPORTVEC_K, 0)
                ' Set Uppdateringsvektor I  = 0.0020008
                retval = DmisCommand.PutText("0.0020008", UPDATEVEC_I, 0)
                ' Set Uppdateringsvektor J  = -0.8883425
                retval = DmisCommand.PutText("-0.8883425", UPDATEVEC_J, 0)
                ' Set Uppdateringsvektor K  = -0.459177
                retval = DmisCommand.PutText("-0.459177", UPDATEVEC_K, 0)
                ' Set Mätt X  = 0
                Set Point = Tip.MeasXYZ
                retval = DmisCommand.PutText(CStr(Point.X), MEAS_X, 0)
                ' Set Mätt Y  = 0
                retval = DmisCommand.PutText(CStr(Point.Y + Ycomp), MEAS_Y, 0)
                ' Set Mätt Z  = 0
                retval = DmisCommand.PutText(CStr(Point.Z + Zcomp), MEAS_Z, 0)
                'MsgBox CStr(Point.Z)
                ' Set Mätt I  = 0
                retval = DmisCommand.PutText("0", MEAS_I, 0)
                ' Set Mätt J  = 1
                retval = DmisCommand.PutText("1", MEAS_J, 0)
                ' Set Mätt K  = 0
                retval = DmisCommand.PutText("0", MEAS_K, 0)
                ' Set Mål-X  = 0
                retval = DmisCommand.PutText("0", TARG_X, 0)
                ' Set Mål-Y  = 0
                retval = DmisCommand.PutText("0", TARG_Y, 0)
                ' Set Mål-Z  = 0
                retval = DmisCommand.PutText("0", TARG_Z, 0)
                ' Set Mål-I  = 0
                retval = DmisCommand.PutText("0", TARG_I, 0)
                ' Set Mål-J  = 1
                retval = DmisCommand.PutText("1", TARG_J, 0)
                ' Set Mål-K  = 0
                retval = DmisCommand.PutText("0", TARG_K, 0)
                ' Set Uppdateringsvektor I  = 0.0020008
                retval = DmisCommand.PutText("0.0020008", UPDATEVEC_I, 0)
                ' Set Uppdateringsvektor J  = -0.8883425
                retval = DmisCommand.PutText("-0.8883425", UPDATEVEC_J, 0)
                ' Set Uppdateringsvektor K  = -0.459177
                retval = DmisCommand.PutText("-0.459177", UPDATEVEC_K, 0)
                ' Set Rapportvektor I  = -0.3930601
                retval = DmisCommand.PutText("-0.3930601", REPORTVEC_I, 0)
                ' Set Rapportvektor J  = -0.0660101
                retval = DmisCommand.PutText("-0.0660101", REPORTVEC_J, 0)
                ' Set Rapportvektor K  = 0.9171403
                retval = DmisCommand.PutText("0.9171403", REPORTVEC_K, 0)
                ' Set ID  = PKT1
                'MsgBox Tip.ID
        
                retval = DmisCommand.PutText("P" + Tip.ID, ID, 0)
                ' Set Koordinattyp  = REKTANGULÄRA
                retval = DmisCommand.SetToggleString(1, COORD_TYPE, 0)
                ' Set X  = <Aktiv uppriktning>
                retval = DmisCommand.PutText("<Aktiv uppriktning>", RMEASFEATIDX, 0)
                ' Set Y  = <Aktiv uppriktning>
                retval = DmisCommand.PutText("<Aktiv uppriktning>", RMEASFEATIDY, 0)
                ' Set Z  = <Aktiv uppriktning>
                retval = DmisCommand.PutText("<Aktiv uppriktning>", RMEASFEATIDZ, 0)
                ' Set Läge 'Sök nom.'  = NOMINELLT
                retval = DmisCommand.SetToggleString(3, FIND_NOMS_TYPE, 0)
                ' Set Typ av yttjocklek  = INGEN_TJOCKLEK
                retval = DmisCommand.SetToggleString(3, THICKNESS_TYPE, 0)
                ' Set Yttjocklek  = 0
                retval = DmisCommand.PutText("0", F_THICKNESS, 0)
                ' Set Autoval, vinklar  = NEJ
                retval = DmisCommand.SetToggleString(1, AUTO_PH9, 0)
                ' Set Håldetektering  = NEJ
                retval = DmisCommand.SetToggleString(1, VOID_DETECT, 0)
                ' Set Grafisk analys  = NEJ
                retval = DmisCommand.SetToggleString(1, GRAPH_ANALYSIS, 0)
                ' Set Elementmarkering BMP  = NEJ
                retval = DmisCommand.SetToggleString(1, LOCATOR_BMP, 0)
                ' Set WAV-fil, elementmarkering  = NEJ
                retval = DmisCommand.SetToggleString(1, LOCATOR_WAV, 0)
                ' Set Elementmarkering text  =
                retval = DmisCommand.PutText("", COMMENT_FIELD, 0)
                ' Set Mätstrategi  = DEFAULT
                retval = DmisCommand.PutText("DEFAULT", MEASUREMENT_STRATEGY, 0)
                ' Set Visa mäthuvudsparametrar  = JA
                retval = DmisCommand.SetToggleString(2, DISPLAY_PROBE_PARAMETERS, 0)
                ' Set Visa avancerade parametrar  = NEJ
                retval = DmisCommand.SetToggleString(1, DISPLAY_ADVANCED_PARAMETERS, 0)
                ' Set Rörelse före/efter  = NEJ
                retval = DmisCommand.SetToggleString(1, MOVE_TYPE, 0)
                ' Set Avstånd före/efter  = 10
                retval = DmisCommand.PutText("10", F_AUTOMOVE, 0)
                ' Set Visa punkter  = JA
                retval = DmisCommand.PutText("JA", DISPLAY_HITS, 0)
        
        
          Next
          app.Visible = True
        End Function

        Comment

        Related Topics

        Collapse

        Working...
        X