Rounded Slot Circle locations

[spazus_maximus]

SLT2 =AUTO/ROUND SLOT,SHOWALLPARAMS = YES,SHOWHITS = NO
THEO/72.076,-439.607,522.199,0.1320065,0.2690133,0.9540472,9.2, 15.22,-0.6527641,0.7479054,-0.1205678
ACTL/72.214,-439.766,523.026,0.1334324,0.2672367,0.9543481,9.16 1,15.22,-0.6485298,0.7517001,-0.1198168
TARG/72.076,-439.607,522.199,0.1320065,0.2690133,0.9540472,-0.6527641,0.7479054,-0.1205678
THEO_THICKNESS = 0,RECT,IN,ONERROR = NO,$
AUTO MOVE = BOTH,DISTANCE = 25.4,RMEAS = None,None,None,$
READ POS = NO,FIND HOLE = NO,REMEASURE = NO,$
INIT = 3,PERM = 3,SPACER = 3,DEPTH = 2,HITS = 10,MEAS ANGLE = 80
SLT3 =AUTO/ROUND SLOT,SHOWALLPARAMS = YES,SHOWHITS = NO
THEO/-22.841,-450.123,538.256,0.1320065,0.2690133,0.9540472,9.2, 15.22,0.3988569,0.8667006,-0.2995719
ACTL/-22.772,-450.347,538.753,0.1270517,0.265375,0.9557374,9.227 ,15.2,0.4034818,0.866398,-0.2942057
TARG/-22.841,-450.123,538.256,0.1320065,0.2690133,0.9540472,0.39 88569,0.8667006,-0.2995719
THEO_THICKNESS = 0,RECT,IN,ONERROR = NO,$
AUTO MOVE = BOTH,DISTANCE = 25.4,RMEAS = None,None,None,$
READ POS = NO,FIND HOLE = NO,REMEASURE = NO,$
INIT = 3,PERM = 3,SPACER = 3,DEPTH = 2,HITS = 10,MEAS ANGLE = 80
LINE1 =FEAT/LINE,RECT,UNBND
THEO/72.076,-439.607,522.199,-0.6527641,0.7479054,-0.1205678
ACTL/72.214,-439.766,523.026,-0.6485298,0.7517001,-0.1198168
CONSTR/LINE,CAST,SLT2,15.22,DEPENDENT
LINE2 =FEAT/LINE,RECT,UNBND
THEO/62.141,-428.224,520.364,0.6527641,-0.7479054,0.1205678
ACTL/62.343,-428.325,521.202,0.6485298,-0.7517001,0.1198168
CONSTR/LINE,REV,LINE1,15.22
ASSIGN/T1 = DELTA(SLT2.TXYZ,LINE1.TIJK,(SLT2.LENGTH/2-SLT2.DIAM/2))
ASSIGN/T2 = DELTA(SLT2.TXYZ,LINE2.TIJK,(SLT2.LENGTH/2-SLT2.DIAM/2))
ASSIGN/A1 = DELTA(SLT2.XYZ,LINE1.IJK,(SLT2.LENGTH/2-SLT2.DIAM/2))
ASSIGN/A2 = DELTA(SLT2.XYZ,LINE2.IJK,(SLT2.LENGTH/2-SLT2.DIAM/2))
SLT2P1 =GENERIC/POINT,DEPENDENT,RECT,$
NOM/XYZ,T1.X,T1.Y,T1.Z,$
MEAS/XYZ,A1.X,A1.Y,A1.Z,$
NOM/IJK,0,0,1,$
MEAS/IJK,0,0,1
SLT2P2 =GENERIC/POINT,DEPENDENT,RECT,$
NOM/XYZ,T2.X,T2.Y,T2.Z,$
MEAS/XYZ,A2.X,A2.Y,A2.Z,$
NOM/IJK,0,0,1,$
MEAS/IJK,0,0,1
LINE5 =FEAT/LINE,RECT,UNBND
THEO/-22.841,-450.123,538.256,0.3988569,0.8667006,-0.2995719
ACTL/-22.772,-450.347,538.753,0.4034818,0.866398,-0.2942057
CONSTR/LINE,CAST,SLT3,15.22,DEPENDENT
LINE6 =FEAT/LINE,RECT,UNBND
THEO/-16.77,-436.932,533.697,-0.3988569,-0.8667006,0.2995719
ACTL/-16.631,-437.16,534.275,-0.4034818,-0.866398,0.2942057
CONSTR/LINE,REV,LINE5,15.22
ASSIGN/T3 = DELTA(SLT3.TXYZ,LINE5.TIJK,(SLT3.LENGTH/2-SLT3.DIAM/2))
ASSIGN/T4 = DELTA(SLT3.TXYZ,LINE6.TIJK,(SLT3.LENGTH/2-SLT3.DIAM/2))
ASSIGN/A3 = DELTA(SLT3.XYZ,LINE5.IJK,(SLT3.LENGTH/2-SLT3.DIAM/2))
ASSIGN/A4 = DELTA(SLT3.XYZ,LINE6.IJK,(SLT3.LENGTH/2-SLT3.DIAM/2))
SLT3P1 =GENERIC/POINT,DEPENDENT,RECT,$
NOM/XYZ,T3.X,T3.Y,T3.Z,$
MEAS/XYZ,A3.X,A3.Y,A3.Z,$
NOM/IJK,0,0,1,$
MEAS/IJK,0,0,1
SLT3P2 =GENERIC/POINT,DEPENDENT,RECT,$
NOM/XYZ,T4.X,T4.Y,T4.Z,$
MEAS/XYZ,A4.X,A4.Y,A4.Z,$
NOM/IJK,0,0,1,$
MEAS/IJK,0,0,1