Just a thought ??

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Peter Fuller
    commented on 's reply
    Vinni is correct, you will either need to create a custom header or you can also add a text box to your report but as long as your trace fields are in the part program then you should be able to pull them into your report.

  • VinniUSMC
    commented on 's reply
    Those all use the same template. You will need to modify the header of the report template, or create your own.

  • qcfire65
    commented on 's reply
    I use the comment / input and I also use tracefield/display for our numbering scheme. I don't have this will show up in DP, all we use in DP are the PPAP, Spreadsheet, & Statistics forms under the Text reports.
    Last edited by qcfire65; 12-09-2016, 11:43 AM.

  • VinniUSMC
    replied
    Code:
    C1         =COMMENT/INPUT,NO,FULL SCREEN=NO,
                Input Part Number:
    C2         =COMMENT/INPUT,NO,FULL SCREEN=NO,
                Input Part Name:
    C3         =COMMENT/INPUT,NO,FULL SCREEN=NO,
                Input Revision:
    C4         =COMMENT/INPUT,NO,FULL SCREEN=NO,
                Input Customer Name:
    C5         =COMMENT/INPUT,NO,FULL SCREEN=NO,
                Input Operator Name and Title:
    C6         =COMMENT/INPUT,NO,FULL SCREEN=NO,
                Input Cavity:
    Yes, the newer versions of DataPage do allow filtering by "tracefield".

    Also, for DP+ 5.2, you don't need to assign the comment inputs to variables, they are automatically seen as tracefields. For older versions of DP+ (not RT), you need to assign the comment inputs to a variable first.

    And then you need to edit the header of a report to show your tracefields.
    Last edited by VinniUSMC; 12-09-2016, 10:39 AM.

    Leave a comment:


  • qcfire65
    commented on 's reply
    I use Tracefields for the order 1 thru 30 per say. So you are saying if I set up the Tracefield that I can actually input cavity as well, can you show how it would look?

  • Matthew D. Hoedeman
    replied
    Tracefields should be what you are looking for. You can even use tracefields to sort data in Datapage (well, not sure about the NEW version, but you could before the 'updated' it).

    Leave a comment:


  • qcfire65
    started a topic Just a thought ??

    Just a thought ??

    Is there a way to get some of the data from PC-DMIS forms on to Data-Page reports like statistics, PPAP, & or spreadsheet forms. When I use the command feature, input, YES - using this I have like a cavity ID in some of my programs where it shows up on the PC-DMIS report but it is not in Data-Page. It would be nice to be able to do this if it can not be done.

Related Topics

Collapse

Working...
X