Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: 2008-07-22 PC Dimas opening North Hollywood California

  1. #1

    Default 2008-07-22 PC Dimas opening North Hollywood California

    Seeking PC Dimas operator programmer for opening in North Hollywood California.

    Thanks,

    manuelm@klune.com
    mmencia@sbcglobal.net

  2. #2
    Member
    • Additional Information
      • Years CMM Experience:
      • 2
      • Software Version:
      • 4.2
      • Machine Type:
      • B&S Global
      • Location:
      • Wrigleyville
      • Job Function:
      • Programmer

    Join Date
    Feb 2008
    Location
    Wrigleyville
    Posts
    45

    Default

    pay,benefits,travel reimbursment? how far from the beach? can we come in at night so during the day we can persue our acting career's? You know, any relavent info would be helpful for a decision.


    "I have a theory that the truth is never told during the nine-to-five hours."- Hunter S. Thompson

  3. #3
    Ultra Senior Member
    • Additional Information
      • Years CMM Experience:
      • Since 1996
      • Software Version:
      • v2014 CAD++
      • Machine Type:
      • XCEL
      • Location:
      • DFW Area
      • Job Function:
      • Layout Inspection/CMM Programer
    DeWain Hodge's Avatar
    Join Date
    Apr 2007
    Location
    DFW Area
    Posts
    965

    Default

    I went to California once didn't lose a thing and can't see any reason to go back.
    DeWain Hodge

  4. #4
    Ultra Senior Member
    • Additional Information
      • Years CMM Experience:
      • 2002 onwards
      • Software Version:
      • v4.2 mr1 CAD++
      • Machine Type:
      • Mistral 10-07-07 DCC
      • Location:
      • Wednesfield,West Midlands,England
      • Job Function:
      • CMM programmer/operator(i write the programmes,i operate the m/c...no one else!)
    RCW52's Avatar
    Join Date
    Apr 2008
    Location
    Wednesfield,West Midlands,England
    Posts
    671

    Default

    Quote Originally Posted by manuel View Post
    Seeking PC Dimas operator programmer for opening in North Hollywood California.

    Thanks,

    manuelm@klune.com
    mmencia@sbcglobal.net
    that's 'PC-DMIS' !!!!
    Richie the Villian!!

    V4.2 MR1 CAD++/MISTRAL 10-07-07 DCC/XP

  5. #5
    PC-DMIS demi-Guru
    • Additional Information
      • Years CMM Experience:
      • 7.08333
      • Software Version:
      • 4.2 MR1...Windows XP SP2......24" Monitor :~D
      • Machine Type:
      • B&S Global 15.22.10...TP20...Tesa-M
      • Location:
      • Live in VA..Work in WV..Good Stuff!
      • Job Function:
      • Programmer

    Join Date
    Apr 2006
    Location
    Live in VA..Work in WV..Good Stuff!
    Posts
    1,545

    Default

    I think he spells it the way it pronounces it!
    ~Josh~ Giles Rescue "Ut ceteri vivant"

  6. #6
    Ultra Senior Member
    • Additional Information
      • Years CMM Experience:
      • 21 8 with pc-dmis
      • Software Version:
      • 3.7mr3
      • Machine Type:
      • Global Image
      • Location:
      • under South Street Bridge 2nd cardboard box on right
      • Job Function:
      • CMM PROGRAMMER /INSP.TECH

    Join Date
    Apr 2007
    Location
    under South Street Bridge 2nd cardboard box on right
    Posts
    676

    Default

    I need to go to Hollywood to pursue my acting career as a cmm programmer

  7. #7
    Ultra Senior Member
    • Additional Information
      • Years CMM Experience:
      • 2002 onwards
      • Software Version:
      • v4.2 mr1 CAD++
      • Machine Type:
      • Mistral 10-07-07 DCC
      • Location:
      • Wednesfield,West Midlands,England
      • Job Function:
      • CMM programmer/operator(i write the programmes,i operate the m/c...no one else!)
    RCW52's Avatar
    Join Date
    Apr 2008
    Location
    Wednesfield,West Midlands,England
    Posts
    671

    Default

    anyone applied for it?
    Richie the Villian!!

    V4.2 MR1 CAD++/MISTRAL 10-07-07 DCC/XP

  8. #8
    PC-DMIS demi-Guru
    • Additional Information
      • Years CMM Experience:
      • Since 1988
      • Software Version:
      • Small Customer CAD++
      • Machine Type:
      • Endeavor 9.12.10
      • Location:
      • N. Hollywood, Ca.
      • Job Function:
      • Stir-up schit
    lambo's Avatar
    Join Date
    Mar 2008
    Location
    N. Hollywood, Ca.
    Posts
    1,444

    Default

    I'm working in N. Hollywood area, cost of living here is very high.
    If one of the PC-DMIS Guru here willing to relocate, can you top 30/hr?

  9. #9
    Senior Member
    • Additional Information
      • Years CMM Experience:
      • 20
      • Software Version:
      • 4.2
      • Machine Type:
      • Zeiss
      • Location:
      • Midlands UK
      • Job Function:
      • Apps Engineer
    Vertman's Avatar
    Join Date
    Nov 2007
    Location
    Midlands UK
    Posts
    277

    Default

    Quote Originally Posted by lambo View Post
    I'm working in N. Hollywood area, cost of living here is very high.
    If one of the PC-DMIS Guru here willing to relocate, can you top 30/hr?
    I'd consider it, never stops bloody raining here in the UK now.

    Don't think a ' gone to Hollywood, be back later' note would impress the wife though

  10. #10
    Ultra Senior Member
    • Additional Information
      • Years CMM Experience:
      • 2002 onwards
      • Software Version:
      • v4.2 mr1 CAD++
      • Machine Type:
      • Mistral 10-07-07 DCC
      • Location:
      • Wednesfield,West Midlands,England
      • Job Function:
      • CMM programmer/operator(i write the programmes,i operate the m/c...no one else!)
    RCW52's Avatar
    Join Date
    Apr 2008
    Location
    Wednesfield,West Midlands,England
    Posts
    671

    Default

    Quote Originally Posted by Vertman View Post
    I'd consider it, never stops bloody raining here in the UK now.

    Don't think a ' gone to Hollywood, be back later' note would impress the wife though
    alright at the moment though pal !!!!

    where abouts are you?
    Richie the Villian!!

    V4.2 MR1 CAD++/MISTRAL 10-07-07 DCC/XP

Similar Threads

  1. 4.2 Beta 02/22/2008
    By *...* in forum PC-DMIS for CMMs
    Replies: 10
    Last Post: 02-24-2008, 12:18 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •