edit program

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • #16
    Originally posted by Cheryl View Post
    Code:
    dcc top of v-block pln2=feat/plane,cartesian,triangle
    theo/<-0.9873,-3.5007,-0.7444>,<-0.0002937,0.0000302,1>
    actl/<-0.9872,-3.5006,-0.7428>,<-0.0028784,-0.0011952,0.9999951>
    meas/plane,4
    hit/basic,normal,<0.4191,0.0578,-0.7441>,<-0.0002937,0.0000302,1>,<0.4191,0.0579,-0.7304>,use theo=yes
    hit/basic,normal,<0.4138,-6.9496,-0.7439>,<-0.0002937,0.0000302,1>,<0.4139,-6.9494,-0.747>,use theo=yes
    move/point,normal,<0.4136,-6.9495,0.0286>
    move/point,normal,<-2.3938,-6.9475,-0.0233>
    hit/basic,normal,<-2.3935,-6.9475,-0.7447>,<-0.0002937,0.0000302,1>,<-2.3933,-6.9473,-0.7467>,use theo=yes
    hit/basic,normal,<-2.3884,-0.1636,-0.7449>,<-0.0002937,0.0000302,1>,<-2.3883,-0.1636,-0.7471>,use theo=yes
    move/point,normal,<-2.3886,-0.1646,0.3568>
    endmeas/
    v-block pln2=feat/plane,cartesian,triangle,no
    theo/<-0.9873,-3.5007,-0.7444>,<0.0002937,-0.0000302,-1>
    actl/<-0.9872,-3.5006,-0.7428>,<0.0028784,0.0011952,-0.9999951>
    constr/plane,rev,dcc top of v-block pln2
    datdef/feature=v-block pln2,a
    The use of mathmatical symbols in your headings is confusing for Pc Dmis...its been covered in numerous postings.

    Essentially what you are instructing the code to do is 'v minus block' & on more than one occasion.

    I would not even run a Cmm program with only 0.02 Hit & Retract values. Far too little time for dissipating any 'inertia' built up.

    In an 'O' ring groove would be an exception with speed adjusted to compensate of course.
    Poleaxe

    Beware the environment you live in for it will shape you
    Be careful the friends you choose for you will become like them.

    sigpic

    Comment

    Working...
    X