There is no content in this section
Any suggestions on measuring the diameter of the intersection of a cone and sphere?
just a loop in series with 17 possible breaks i assume.
probably not the issue but man with that much going on.. makes me wonder, even with all closed loop, is your signal getting weak.
Right, the wire-frame stuff is essential for points and vector lines that surface mode won't accommodate. But if you do not have any of those, surface mode will work just fine.
Thank you lord_warfield.
I feel like this is very close to a solution for me.
this bit here though...
COMMENT/REPT,THIS IS THE DEVIATION HISTORY OF LAST (5) PARTS CHECKED
I totally agree.
I was curious to know if the Z deviations, when combined with the X and Y, would equal the reported position errors on the report. I don't know what the Z deviations were so I...