PDA

View Full Version : Visio Magnification

Arenw
10-09-2007, 10:21 AM
We have a new Tesa Visio 300 DCC that was just calibrated last week. When I attempt to change the magnification, which is at the lowest setting (.7) I get an error saying that I am attempting to move outside of the calibrated range and it automatically goes back to .7 magnification. I can't seem to get a call back from tech support so I figured there may be someone on here that may know what the heck is going on. Any takers??? Thanks.

Aren
cmmguy
10-09-2007, 11:03 AM
I wonder if they didnt calibrate the other mags...
Arenw
10-09-2007, 12:40 PM
Problem fixed. I guess it was my startup sequence.
cmmguy
10-09-2007, 12:47 PM
Problem fixed. I guess it was my startup sequence.

What was wrong with your startup sequence? Do you have to start things up in a particular order?
nkayWAI
10-10-2007, 05:35 AM
Hi Arenw, can you check your CNC.INI file in the pcdmis folder, and tell me what the Continuation Threshold is set to in the [Axis 4] section? If it is set to less than 10, change it so it is 10. If you still see the problem, try changing it to around 20.
can-schaeffler
05-26-2008, 03:10 PM
The problem you have will likely happen again. I seem to have it every time someone tries to neaten up the wiring. The cables likely need to be checked